Plants need water, sunlight, air and soil to grow, nature provides light, air and soil for plants to grow, but we are the ones who must answer the thirst of the plants in our garden. If you are looking for ways to water your garden, you have come to the right place, this article will introduce you to more tips on watering plants.
Garden irrigation methods
Below we have introduced the garden irrigation methods:
Garden watering with sprinkler
Gardens are small gardens that can be watered with sprinklers, but using this method requires a lot of time and patience. You have to fill the sprinkler with water every time and bear the weight of the sprinkler full of water. If your garden is not very big and it doesn’t take much time, choose sprinkler irrigation because the most beautiful and emotional way to water the garden is sprinkler irrigation.
Irrigation of the garden with a hose
Garden watering with a hose is like watering with a sprinkler, with the difference that you don’t have to fill the sprinkler with water every time, in fact, the simplest methods of watering the garden are watering with a sprinkler and a hose. If you have a lot of time and patience, you can choose to irrigate your garden with a hose and sprinkler.
Put the end of the hose on the plant and let the plant be watered slowly with moderate water pressure. Never put the hose under the plant with high water pressure, high water pressure will cause the soil to move and form a hole, it is even possible that the root of the plant will be exposed and exposed directly to the air and sunlight.
Irrigation of the garden by rain method
Irrigation by rain method is another method of irrigation of the garden. In this method, PVC plastic pipes are buried in the soil, sprinklers are connected to these pipes, these sprinklers spread water in the air and irrigate plants like rain. In the rain irrigation method, a lot of water evaporates, and because the entire garden is irrigated, more weeds will grow in the garden.
Garden irrigation by drip method
The best methods of watering the garden are drip irrigation. Drip irrigation not only saves water, but also saves time, energy and money. Soil erosion and weed growth is much less in this method. With the drip irrigation system, you only make the settings and you don’t have to spend a long time watering your garden with a hose or sprinkler.
Drip irrigation is a network of water pipes that is distributed throughout the garden. In this network, at the foot of each plant or tree, a dripper is installed to deliver water drop by drop and with low pressure to the plant. The water distribution in this method is uniform, although the amount of water distribution can be changed by adjusting the droppers. In this method, an irrigation timer can be used at the beginning of the pipe route so that irrigation can be done with more management and planning.
It is better to know that chemical irrigation is possible with drip irrigation. Chemical fertilizers are injected and dissolved in the main water transfer pipe, the fertilizer falls on the feet of each plant, this method of fertilization is called chemical irrigation.
Professional Caucasian Gardener Building Plants Irrigation System in Developed Garden. Industrial Theme.
Time to water the garden
It doesn’t matter which of the garden watering methods you choose, in spring and summer, you should water the plant one to three times a week, as the heat increases and the rate of evaporation increases, the number of watering times increases, but the best time for Irrigation of the garden is early in the morning and in the evening, during these hours the evaporation of water by the sun is very low, so less water is wasted during these hours. Pay attention that at noon, when the sun shines vertically, the rate of water evaporation reaches the maximum, so you should not irrigate at noon.
Tips on garden irrigation
Now that you are familiar with garden irrigation methods, learn some tips about watering plants:
It is better to plant native plants in your garden. Native plants are adapted to the climatic conditions of their region.
It is good to know that plants with thin leaves need more water than plants with fleshy leaves.
Keep the weeds away from your garden, they consume the water that you intended for the plants in the garden, this way the useful plants are left bare and you have to give more water to the garden every time.
If you want to keep the soil moist, cover the soil surface with mulch. Mulch keeps the air in and protects the moisture of the soil from evaporation, so sprinkling mulch on the soil will reduce the frequency of watering, and with this, weeds will not have a chance to grow.
Do not use plastic mulches, natural mulches such as sawdust, hazelnut shells, walnut shells, grass clippings and leaves work much better.
Air pollution may coat leaves and plants with a layer of soot. In this situation, they wash the leaves to prevent the openings from being blocked. Make sure that the water pressure is not too high, so as not to break the branches, stems and damage the leaves and petals.
Plants such as moss and algae move the water inside their tissues outside when they are dry, so the neighborhood of garden plants with moss and algae when the plants are thirsty will be useful and efficient.
The amount of fertilizer that you use in your garden should be the right amount. A lot of fertilizer makes the plants feel more thirsty in the summer.
watdgroup offers home remodelling and renovation services in GTA . From complete house renovation to single-room remodelling, we have the professionals and infrastructure to produce your desired results.”
